PPP AR+

The first screen you'll see after selecting the "Downloads" button is a scrolling thumbnails list of the custom models that you've uploaded into your app. If you haven't had any custom models loaded into the system, you won't see any models available.
To have models loaded into your "Downloads" area, contact us for instructions on what format the system uses for the custom models. Once the model is uploaded onto our server, you'll receive a "Redeem Code" that you use to download your custom model. The "Redeem Codes" are used so other users won't have access to your custom models.
After selecting your custom model, the app starts scanning the surface where you'll place the model.
When you touch the "Check" button, the app places the model in the scene where you've pointed the brackets [ ].
After you've set the placement of the model, you may need to touch the "Place" button again to adjust or spin the model around.
The models are placed in the scene at the correct size of the model in the environment. You can't make the model larger, but you can make the model smaller by pinching the screen in the Edit mode.
In the Downloads area only, there is a special function to detach the model from the scanned surface and move it vertically in the scene.

Buttons in the Downloads Section

- Download Code

Use this button to access the Download Code field to enter the unique code for your custom model. The code only uses lowercase letters and numbers.

- Delete

To remove a custom model from the Downloads area, use this delete button next to the thumbnail of the custom model.

Touch the "Check" button to accept the position and rotation of the model. The app then shows the "Plus" button to add an additional model, and the "Camera" button that takes you into the "Photo" mode where you adjust the lighting in the scene and take your photo.

- Minus

Use the "Minus" buton to remove the active model from the scene. This is only available in the "Edit" mode.

- Camera

The "Camera" button takes you into the "Photo" mode where you adjust the models in your scene and take your photo.

- 3/4 Back Light

Use this button to add a 3/4 back light to the model, either from the left or right side of the scene.

- Take a Picture

The Finger button takes a picture of your scene.

- Social Media Guide

Square outline for composing your pictures for Social Media.

- Grey Slider

Top Middle of the display. Adjust the density of the model's shadow in the scene.

- Help

Help Information and Links to the demonstration videos.

- Download Custom Model

After entering the Redeem Code, touch "Done", and then the down arrow to download your custom model.

- Back

Touch the back arrow to return to the model sections (Vehicle, People, & Downloads).

- Detach

Touch the "Detach" button to detach the model from the scanned surface. Then touch the model and drag it up in the scene to the desired position.

- Plus

The "Plus" button takes you back where you can choose another model to add to your scene. You can choose another model from any of the 3 model sections (Vehicles, People, & Downloads).

- Infinite Plane

When the infinite plane button is set to "On", the surface plane that was scanned is extended out further than the area that was scanned, so you can place your model further back in the scene. If "Infinite Plane" is set to "Off" the area where the model can be placed is limited to the area that was scanned by the app.